The better you know the types of ceramics, the more successful you can be in choosing the best ceramics for the floor and walls of your home. However, the existence of different ceramic models has made it more difficult for people to choose. From finding the best design, color, etc. for the reception floor to the best ceramic for the bedroom floor, etc. Because of its flexibility, ceramic can be used in all parts of the house. Ceramics are produced for floors, walls and even yards. Floor and wall ceramics have long been used as coverings for floors and walls. Ceramic is hard and durable and can last for decades with minimal grouting before needing to be completely replaced.

There is no noticeable difference in the appearance of floor and wall ceramic tiles, but in terms of style, it is common for wall tiles to be relatively small compared to floor tiles. Wall tile is smaller and lighter because of its nature and the difficulty of installing it on a vertical surface. For example, an 18" square floor tile is not usually used on walls. Floor tiles can be up to 18" x 18" square. Large size tiles are more popular. An exception is when floor tiles are mosaic sheets, (small tiles glued to mesh backing sheets.) Classic 1-inch hexagonal mosaics have long been used for bathroom floors. Wall tiles, such as floor tiles, have good water resistance. have

However, in countertop applications, wall tiles are slightly thinner and therefore may be less resistant to the heat of hot pans. Floor tiles are usually thicker than wall tiles and therefore better heat resistant for countertop installation. They have heat. However, it is not suitable for wall installation. Wall tiles are thinner than floor tiles and therefore should not be used on floors as they crack due to high traffic. However, they are quite durable and easy to maintain for wall installation. Floor tiles are thicker and stronger than wall tiles, so they are suitable for wall or floor installation. Both floor and wall tiles are installed in the same way.

First, a bottom layer is cemented on the floor or wall; Then the tiles are attached to the wall or floor using thin adhesives. After drying, the joints between the tiles are filled with a paste-like grout and mortar, which is sealed after it dries and hardens. As thicker tiles, floor tiles are slightly more difficult to cut than wall tiles. Using a wet chainsaw is a good idea for these heavy tiles. Floor tiles, being a heavier and stronger material, will theoretically last longer than wall tiles.However, in practice, both tiles are likely to last a lifetime. The only important advice is to make sure that the tiles installed on a floor or wall have a hardness rating (PEI) and a COF friction rating that are suitable for the application. . Any type of tile can be applied to the wall, but it is important that the floor tile is rated for this purpose.